WHITE TONER TRANSFERS INSTRUCTIONS 

TEMP -325

TIME - 30 seconds

PEEL -cold peel

Place transfer sheet print side down onto garment, and cover with Teflon.

STEP 1. Heat press at 325 degrees for 30 seconds.

(If pressing on the poly, a slightly lower temp can be used)

cover it with teflon.

*Press the garment using a heat press

(not a Easy Press or iron)*

If you are pressing on 100% polyester, reduce heat to 310 degrees 20 seconds.

STEP 2. Make sure to – COLD ROLL OFF - DO NOT PULL OR PEEL. – Let shirt cool for about 5 minutes OR LONGER, once completely COLD carefully ROLL away the transfer sheet in a one smooth, continuous rolling motion.

STEP 3. Then cover with parchment OR kraft paper {with silicone is the best}

(do not use butcher paper)

 STEP 4. Repress for about 10 seconds with high pressure.

(Warm roll off the parchment paper) 

---> NOTE: Each heat press is different. I recommend testing your press at different pressure/temperature/time settings with sample sent to determine the best press for you.

**Please Review any & all artwork guidelines before emailing your images.

We DO NOT make any changes to artwork sent. **

**Please note, files purchased from Etsy or any third-party site that are PNG files are normally not in CMYK, we cannot guarantee the colors of the prints, however we will work will you along printing process!